Form Wash automates the print washing process for consistent, thorough, no-mess cleaning. Parts can be transferred directly from the printer to Form Wash and either rinsed directly on the build platform or removed and placed in the wash basket. Form Wash is designed for parts printed on the Form 3 generation printers, and can also be used for rinsing smaller parts printed on our large format 3D printers, Form 3L, and Form 3BL.Futomate Cleaning with Form Wash Parts travel straight from the Form 3+ to Form Wash. Opt to go glove-free and keep parts directly on the build platform. Set it and Forget it Simply set the appropriate time and let Form Wash get to work. 15 MINUTES Approximate wash time when using fresh isopropyl alcohol (IPA) 8.6 LITERS IPA volume for removable wash bucket 70 PRINTS Amount of prints per IPA refill in regular use A Consistent, Automated Workflow Once washing completes, Form Wash automatically lifts parts out of the IPA, avoiding over-soaked, warped prints. Parts air dry and are ready when you are. HYDROMETER A custom hydrometer tool to check IPA saturation. STORAGE Behind the wash bucket to keep finishing tools tidy. SIPHON PUMP Easy IPA transfer into and out of the wash bucket.